Product Description:

The LCC-PTG310-A centralized controller is a central controllerdeveloped by CAS Smart City Software Co.,Ltd. It is used in the key equipmentof centralized control power line network communication system (such as electricenergy information gathering and remote control in street lighting system,etc.), installed in the low voltage side of the low-voltage distributiontransformer in the street light box, and carries on the remote control to thestreet lamp through the electric power carrier communication.

The device collectively manages the node controller in the samepower environment (up to 1024 nodes can control the number of nodes), which canindependently manage the network of its own nodes through the power line, andlisten to and accept the instructions of the monitoring center. Nine functionsare included: analog acquisition function, input switch monitoring function,output control switching lamp function, LED status display function, timemodification function, manual switching lamp function, fault monitoring alarmfunction, loop control function and electrical usage acquisition function.

LCC-PTG310-A centralized controller uses the command line ofthe way to enrich the embedded software function interaction. Interactiveinterface is intuitive and friendly.

Product Features:

lUsing ARM9high-performance processor and embedded Linux software system.

lLarge systemcapacity, management of up to 1024 node controller.

lPower carrier communication: the nodecontroller uses power carrier communication, stable and reliable, no need tore-wiring.

lTiming Task Control: You canconfigure multiple timing tasks to control LED operation according to actualneeds.

lLight perception control: throughthe light sensor module to perceive the outside light, Control LED lightsswitching and brightness via lighting illuminance. Street light system can determineswitching according to the day and night by itself.

lRemote meter reading: real-time electricenergy meter data query and monthly count the electricity consumption on 00:00 1^stautomatically as well as save more than 12 months of historical electricityconsumption.

lLoop control: provides 6 loopcontrols, control loop switching; through the loop expansion module to expandmore than 8 loop controls.

lCli command line operation: to providea large number of command operations, through the serial port or network portconcentrator command operation, interactive friendly, not prone to error.

lFault patrol: can be customizedcycle inspection node controller,find abnormallyrunning node and report to the user.

lSupport a variety of communication: supportGPRS wireless communication, quickly network according to the actual needs ofusers, modular communication realizes plug and play, easy to operate.

lWireless communication flow control: monthlydetection of communication sim card costs, when balance is too low it willnotify the user to recharge in advance.

lSupport base station proofreading time: can proofreadtime through the base station of telecommunications station, do not rely on thehost computer to proofread time manually and when the onboard battery is nopower can still guarantee the correct time of the system.

l Firmware dual backup: the systemstores two copies of the system, the system will automatically enable thebackup system, but also to protect the security of the upgrade, if the upgradeis fail, the backup system can be used.

lDual watchdog design: inaddition to the application's soft watchdog, the chip watchdog is also used tomonitor kernel crashes.

lLog records: automatically recordproduct history usage and abnormal reset records, monitor system long-termstable operation. When problem appears, help to investigate quickly andeffectively.

lRestore the factory parameters: to providekey operation to restore the factory parameters, easy maintenance, when theuser forget the concentrator IP address, this key can be restored to thefactory IP address.

Technical indicators:

l  Concentratorusing ARM9 main processing chip with high processing capacity, up to 400MIPSpeak running rate.

l  Has astrong communication interface, support GPRS wireless communication.

l  Communicationand electrical specifications are compatible with EIA709.1, EIA709.2, EN50065-1international standards.

l  Throughinterface: power line carrier to achieve a single lamp control function.

l  with TCP /IP interface, to achieve a seamless connection with the Internet.

l  Automaticallyoptimize network structure, network performance monitoring and running statusrecords.

l  Single lampcontrol success rate of 99.5%.

l  Mobilephone remote, remote control success rate of 99.5%.

l  Automaticfault reporting, failure rate of 1% or less.

Extended interface:

Connection Diagram：